KTM SXF/XCF Valve Adjust

This DVD Applies to the following KTM SXF and XCF models:
2005-2007 250 SXF
07 250 XC-F
07 250 XC-F-W

Valves that aren’t adjusted properly can cause major engine damage ($$$$$). Symptoms of improperly adjusted valves are an engine that is hard to start or has poor engine performance. You can expect to pay $60 for a shop to check and adjust your valves. We’ll show you how to check and adjust your valves in probably less time than it takes to drop off the bike at the shop.

This DVD is designed for those who prefer watching a demonstration rather than reading a manual or fumbling your way through the process. After watching our detailed step-by-step video, you should be able to service your valves in approximately 45 minutes if you possess moderate mechanical skills.

We’ll show you how to do this in your garage with minimal special tools. The mechanic speaks slowly so you can watch the video and take notes if you like. Unlike most maintenance videos that focus on the actor, this video is shot at close range so you can see the details. You can see each part through disassembly and reassembly. No steps are skipped.

What you’ll get:
A detailed video performed by a certified motorcycle mechanic on a 2007 KTM 250 SXF.

What you'll need:
Tools and Supplies

This DVD contains the following:

People learn faster from and instructional DVD than from reading a repair manual.
You’ll be more confident of doing the task after watching a professional than you would be after reading the service / repair manual.
Service / repair manuals don’t show you how to make your own tools. Some of our instructional DVD’s show you how to make inexpensive tools.
Service / repair manuals don’t go into the same detail as found in the DVD.
The DVD applies to more types of bikes than the service / repair manual covers.
You can preview the level of effort required to do the job before you start. This is difficult to assess with the service / repair manual.
The service / repair manual generally shows one way to do the task. When applicable, the DVD will show several ways.
Sometimes the service / repair manual recommends removing parts (Radiators / carburetors) that aren’t necessary to be removed to do the procedure correctly.
The service / repair manual doesn’t describe how the parts operate. The DVD describes how some parts operate.
We recommend using the motorcycle repair or service manual as a reference for specifications.
However, there’s nothing better than watching someone do the procedure.
The repair manual just isn’t as good as a video when it comes to showing and describing a process.

Savings estimate
Procedure	LABOR cost per occurrence	Estimated occurrences per year	Estimated time it will take to do the procedure after watching the video	Video cost	3 year savings
Valve check & adjust	$65.00	3	1 hour	$24.95	$563.05