Motopower Video Productions LLC

Kawasaki and Suzuki Valve Adjust General Description (DVD: VKX450F06D)

Valves that aren’t adjusted properly can cause major engine damage ($$$$$).  Symptoms of improperly adjusted valves are an engine that is hard to start or has poor engine performance.  You can expect to pay $60 for a shop to check and adjust your valves.  We’ll show you how to check and adjust your valves in probably less time than it takes drop off the bike at the shop

This DVD is designed for those who prefer watching a demonstration rather than reading a manual or fumbling your way through the process.  After watching our detailed step-by-step video, you should be able to check and adjust the valves in approximately 45 minutes if you possess moderate mechanical skills.

Clips from the DVD

We’ll show you how to do this in your garage with minimal special tools.  The mechanic speaks slowly so you can watch the video and take notes if you like.  Unlike most maintenance videos that focus on the actor, this video is shot at close range so you can see the details.  You can see each part through disassembly and reassembly.  No steps are skipped

What you’ll get:
A detailed video performed by a certified motorcycle mechanic on a 2006 Kawasaki KX450F  

What you'll need:
Tools and Supplies

This DVD contains the following:

• DVD sectioned into chapters so you can find information quickly
• Detailed tool and supplies list
• How to remove the valve covers
  
• Finding Top Dead Center
  
• Valve location and operation
  
• Roving valve shims
  
• How to calculate the correct shim size
  
• How to replace the intake and exhaust shims
  
• Installing the valve cover
  
• Complete re-assembly
  

• Specific torque settings.
  
• Consult your service manual since this procedure applies to many motorcycles and your bike may have already been modified.

• People learn faster from and instructional DVD than from reading a repair manual.
  
• You’ll be more confident of doing the task after watching a professional than you would be after reading the service / repair manual.
  
• Service / repair manuals don’t show you how to make your own tools. Some of our instructional DVD’s show you how to make inexpensive tools.
  
• Service / repair manuals don’t go into the same detail as found in the DVD.
  
• The DVD applies to more types of bikes than the service / repair manual covers.
  
• You can preview the level of effort required to do the job before you start. This is difficult to assess with the service / repair manual.
  
• The service / repair manual generally shows one way to do the task. When applicable, the DVD will show several ways.
  
• Sometimes the service / repair manual recommends removing parts (Radiators / carburetors) that aren’t necessary to be removed to do the procedure correctly.
  
• The service / repair manual doesn’t describe how the parts operate. The DVD describes how some parts operate.
  
• We recommend using the motorcycle repair or service manual as a reference for specifications.
• However, there’s nothing better than watching someone do the procedure.
  
• The repair manual just isn’t as good as a video when it comes to showing and describing a process.